Honda Goldwing Parts & Honda Goldwing Accessories
New Items
OEM Parts
2018 GL1800
F6B
Honda GL1800 Parts & Honda GL1800 Accessories
Honda GL1500 Parts & Honda GL1500 Accessories
Honda GL1200 Parts & Honda GL1200 Accessories
Honda GL1000 & GL1100 Parts & Honda GL1100 Accessories
Valkyrie
Can-Am Spyder
Harley
Tires
Maintenance
Weekly Specials
Apparel
Garmin GPS
Gerbing
VIP Discount
FAQ
Policies
About Us
Contact Us
My Account
Blog
Testimonials
Links

Search
 
Bookmark and Share
Optimate 3 Battery Charger-Maintainer (P3807-0261)
Price:
$53.00

Item:   P3807-0261   OptiMate/TecMate  (in stock)

Details:

The most TRUSTED battery charger in power sports! 
OptiMate 3, the all-in-one tool for 12V battery care at home. Diagnoses, recovers, charges, tests and optimally maintains, automatically. The latest version of OptiMate 3 retains all easy-to-use characteristics of the over 2 million OptiMates produced since 1995, but is now lighter and more efficient than ever. The OptiMate 3 recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. 

 

  • CHARGING AMPS : 0.8A (constant current)
  • USE : Indoor / Outdoor  (lowest temperature: -4°F / -20°C).
  • SAVE : Low Volt Start of 2V + 2 step desulphation recovery.
  • IDEAL FOR : STD, AGM & GEL 12V batteries from 3 – 50Ah.
  • INPUT : Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed.
  • STYLE : Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set included.

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. 3-year limited replacement warranty.

How it works

1. Safety check: OptiMate 3 must be connected to a battery (retaining minimum 2V) to activate its output.

2. Desulfation and recovery: if due to sulphation the battery’s resistance is abnormally high, a voltage of up to 20V is

automatically applied to overcome this so as to recover very flat or neglected batteries until they are able to accept

the normal charge program.

3. Bulk charge: a constant current of 0.8A efficiently brings the battery close to full charge.

4. Charge verification: Charge verification: as soon as the rising resistance causes the charge voltage to reach 14.3V,

the voltage is limited at 13.6V for 30 minutes while the circuit monitors the actual voltage and the current absorbed

by the battery. If within 30 minutes the automatic circuit judges that the achieved charge is less than optimal, the

program reverts to bulk charge and the process repeats.

5. Charge retention test: when the monitored parameters confirm that an optimal charge has been achieved, the first

check for battery (and connected system) power leakage commences. Depending on the voltage retained during

30 minutes, an “OK” (green LED) or “not OK” (red LED test result is displayed. These 30 minute test periods repeat

hourly until the OptiMate 3 is disconnected, so that the battery status indication is continually updated.

6. Charge maintenance: during alternate 30 minute periods, at a float limit of 13.6V the battery is offered charge

current (up to the maximum) it needs to sustain it against any small connected loads or power leakage and against

natural self-discharge. OptiMate 3 can stay connected to the battery indefinitely, the battery will stay cool and safe.

And optimally charged. Of course.

Technical Specifications

Ideal for 12V lead-acid batteries 2.5 to 50Ah, AGM (MF), Standard, GEL and AGM spiral

cell

Program control Microprocessor (5 stages)

Output current (bulk charge) 0.8A

Automatic desulphation yes

Charge time limit maintenance time: unlimited

Maintain / test cycles 30 min/30 min (alternating hourly)

Charge retention test monitors during 30min., no charge intervals

Size 167 x 65 x 46 mm / 6 1/2 x 2 1/2 x 1 3/4 inches

Weight (packaging) 0.6 kg / 1 1/3 lb

Enclosure classification fully sealed (IP54), 4 x wall mount tabs

Input cable length 2m / 6ft

Output cable length 2m / 6ft

Included Accessories O-01: weatherproof permanent lead

O-04: alligator/battery clips

Operation temperature range From –20ºC <-> 40°C / –4°F <-> 104°F

Warranty 3 years

AC supply 100-240V~50-60Hz

0.23A @ 100V – 0.15A @ 240V

Reverse drain current less than 1mA

Power usage (no battery connected) 0.0089kWh / day

Ratings / approvals : Safety, EMC, Energy

efficiency, enclosure seal rating

IP54, CE, NRTL (UL & CSA), SAA (AU & NZ), PSE (Japan)

approved by TUV Sud. BC (California Energy Compliant).

Quantity:
back add to cart add to wishlist
Site Mailing List 

Cyclemax
1022 Marks Rd.
Valley City, Oh 44280
Phone: 330-225-1169
Email: info@cyclemax.com
Hours: Mon-Fri  10:00am - 6:00pm 
Sat-Sun  Closed



Copyright © 2003-2018 Cyclemax.com. All Rights Reserved.