Item: JB50133 J-B Weld (in stock)
Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond. 50133
Body Panel Adhesive, Filler & Sealer
Prepare: Clean surface area of dirt, grease, oil, paint or loose debris.*
Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time is longer.
* For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
1022 Marks Rd.
Valley City, Oh 44280
Hours: Mon-Fri 10:00am - 6:00pm
Copyright © 2003-2018 Cyclemax.com. All Rights Reserved.